Environmentally safe furniture stripper

Description:In the following examples PVB-1 has a weight average molecular weight Mw in the range of 30, to 40, and about When trying to build up films thicker than 30 mils microns , or when trying to apply the stripper on a glossy or greasy vertical surface, it is advisable to build the stripper film in two separate applications. PVB resin is produced by known aqueous or solvent acetalization processes reacting polyvinyl alcohol PVOH with butyraldehyde in the presence of acid catalyst, followed by neutralization of the catalyst, separation, stabilization and drying of the reaction product polymeric resin. Emulsions useful as paint strippers can be prepared by any conventional method known in the art, such as by combining PVB, DME and water, followed by mixing, e. Plants should be covered or washed thoroughly with water before and during application. Equip the sprayer with a tip size of 0. If using masking tape, apply two layers of tape and remove the top layer immediately after application as the remover may soak through the tape, damaging paint under it.

Views: 1240 Date: 2018-05-07 Favorited: 19